Please Help connecting Roland GR-55, Presonus 1810 studio,TcHelicon Voicelive play electric, Digitech Trio +, and Behri

Recording engineering discussions and questions. Also a great place to discuss software, plugins, and computer based recording/arranging.
Post Reply
pcsolutionsx
newbie
Posts: 1
Joined: April 1st, 2019, 8:16 am

Please Help connecting Roland GR-55, Presonus 1810 studio,TcHelicon Voicelive play electric, Digitech Trio +, and Behri

Post by pcsolutionsx » April 1st, 2019, 8:18 am

Please Help connecting Roland GR-55, Presonus 1810 studio,TcHelicon Voicelive play electric, Digitech Trio +, and
Behringer Europort PPA500BT PA System.


I havent a clue where in the chain to put these components. What should be connect to what, inputs, outputs, fx send and returns.

Roland GR-55 - this is what I want the guitar to use for FX and Midi Sounds. The Guitar has gk3 pickup and 8 pin Connector for the gr-55.

TcHelicon Voicelive play electric - I would assume the mics have to go in here first. The guitar has to control the key the vocal harmonys are in so that I assume has to also go in here first. I do not want to use this for guitar FX most of the time.

Digitech Trio + - This should be connected somewhere in the chain.

Digitech Harmony Man

Europort PPA500BT PA System - This has bluetooth in but NO OUTPUTS. This works well as a studio monitor. I think if the computer uses this to monitor it will bypass the presonus

Presonus 1810 studio - The usb connection to the computer. has mic, guitar and regular line ins. I want to record on my computer using this and DAW programs.

Peavey vyper pro 100

Post Reply