Tips on adjusting truss rod on Line 6 JTV-69??

Need to know how to setup your guitar? How do you lower your action? How do you get rid of the Milli Vanilli stickers? Look here first.
Post Reply
Adamatic
newbie
Posts: 4
Joined: September 24th, 2011, 4:31 am

Tips on adjusting truss rod on Line 6 JTV-69??

Post by Adamatic » May 6th, 2012, 4:45 am

Greetings,

I'm the owner of JTV-69US and do any fellow users have tips on how to properly adjust the truss rod? It seems that I am unable to properly access the truss due to the angle. Thanks for any tips at all!

EzraplaysEzra
Full Member
Posts: 488
Joined: April 13th, 2012, 6:07 pm

Re: Tips on adjusting truss rod on Line 6 JTV-69??

Post by EzraplaysEzra » May 6th, 2012, 10:09 am

It looks like an old 60's strat set-up. You either have to remove the pickguard and subsequently the neck pick-up if the is a channel routed between the neck pickup cavity and the truss rod access route (and I'm sure there is) or you might need to remove the neck, as I normally do. Its a process, luckily you don't have to do it very often. Remove neck, 1/4 turn, reinstall, restring, repeat.

Post Reply