Notes Cut Out on Bends

Need to know how to setup your guitar? How do you lower your action? How do you get rid of the Milli Vanilli stickers? Look here first.
Post Reply
mkmossop
newbie
Posts: 1
Joined: February 24th, 2016, 1:28 pm

Notes Cut Out on Bends

Post by mkmossop » February 24th, 2016, 1:33 pm

When I bend my high e string the sound cuts out part way up the bend. This happens from about the 12th to 19th frets. Would tightening or loosening the truss rod help maybe, or should I take it in somewhere to get repaired?

Thanks for any help!

edit: if it matters this is for a Gibson SG.

tslleach
newbie
Posts: 2
Joined: April 12th, 2016, 6:22 am

Re: Notes Cut Out on Bends

Post by tslleach » April 12th, 2016, 7:25 am

Sounds like you are 'fretting out', as your action is too low for your current setup. Try a small truss rod tweak to give yourself a little space to bend. Loosening the truss rod would be the way to go I imagine. More relief.

User avatar
notes_norton
Guitarnoise Denizen
Posts: 1497
Joined: May 20th, 2008, 5:04 am
Location: Fort Pierce, Florida, USA
Contact:

Re: Notes Cut Out on Bends

Post by notes_norton » April 22nd, 2016, 4:16 pm

I'd raise the bridge if the neck is straight.

It's the reason I hate Fender guitars. Curved fretboard (short radius) means I have to have the bridge higher, and therefore higher action to bend the strings a lot.

Some Fenders have 7 or 9 in fretboards, I won't play anything under 12 and prefer 14.

But that's just me. YMMV. Jeff Beck does pretty well with a Fender.

Notes
Bob "Notes" Norton

Owner, Norton Music http://www.nortonmusic.com Add-on Styles for Band-in-a-Box and Microsoft SongSmith

The Sophisticats http://www.s-cats.com >^. .^< >^. .^<

Post Reply