classic guitar neck bend

Need to know how to setup your guitar? How do you lower your action? How do you get rid of the Milli Vanilli stickers? Look here first.
Post Reply
yahavuna
newbie
Posts: 2
Joined: January 28th, 2017, 3:07 am

classic guitar neck bend

Post by yahavuna » January 28th, 2017, 3:50 am

Hello dear friends.
I Recently started to put an effort into setting my old guitars up and fixing those that needs some fixing.
I have this not so old classic guitar. she was pretty cheap, but of an OK quality. haven't touched her in a while, but now that i have been researching and performing some set ups on other guitars, i noticed the neck in this one is quite problematic. seems to have got quite a bend just on the connection with the body. is this repairable? or even worth the hassle? if it is and anyone has had similar problem i'd love to hear how you dealt with this situation.
btw, the guitar has no truss rod.
Thanks!
Image

Image

Image

Image

Image

Image

Image

User avatar
Alan Green
Guitari Lama
Posts: 7946
Joined: September 23rd, 2002, 1:35 am
Location: Little Cambridge, Essex, UK
Contact:

Re: classic guitar neck bend

Post by Alan Green » January 28th, 2017, 4:46 am

No truss rod - so it's got nylon strings on it, right?
"Be good at what you can do" - Fingerbanger
"I have always felt that it is better to do what is beautiful than what is 'right'" - Eliot Fisk

Wedding music and guitar lessons in Essex. Listen at: http://www.rollmopmusic.co.uk

yahavuna
newbie
Posts: 2
Joined: January 28th, 2017, 3:07 am

Re: classic guitar neck bend

Post by yahavuna » January 28th, 2017, 5:56 am

yes indeed nylon strings, it's a classic Spanish guitar

LessPaul
Junior Member
Posts: 69
Joined: January 14th, 2017, 7:23 am
Contact:

Re: classic guitar neck bend

Post by LessPaul » January 29th, 2017, 10:01 pm

shoot. that's pretty common actually. Do you get fret buzz? sometimes you can hammer down a fret (with something like the back of a screw driver). Otherwise. I'd probably involve a luthier :/

Post Reply