Guitar neck adjestment mistake

Post your question here and an experienced guitar player or teacher will get back to you.
Post Reply
liamaustin7v
newbie
Posts: 1
Joined: December 18th, 2016, 6:06 am

Guitar neck adjestment mistake

Post by liamaustin7v » December 18th, 2016, 6:12 am

Hi guys - first post here and im not sure its in the right place. I have an ibanez jem 70v and the high E string was way too close to the neck, so I read that loosening the screws on the bolt-on neck joint and moving it slights could resolve the issue. Being the idiot that I am, after undoing the screws a half turn (wasn't enough relief to move the neck) I undid them completley, with the strings on and still tuned to full tension.

After my mistake, I tightened them again, moving the neck to the correct position in the process. It has snapped back into the pocket fine, the guitar stays in tune, and there are no cracks I can see.

Have I damaged the guitar in any way? Where should I check? I realise this is such a silly thing to do to such a lovely guitar.

Any help/reassurance would be much appreciated.

Liam

User avatar
Alan Green
Guitari Lama
Posts: 7952
Joined: September 23rd, 2002, 1:35 am
Location: Little Cambridge, Essex, UK
Contact:

Re: Guitar neck adjestment mistake

Post by Alan Green » December 18th, 2016, 10:54 am

You've probably got away with it, but we can now say we've seen everything.

But - why didn't you start by raising the bridge saddle for that string? They're all individually adjustable.
"Be good at what you can do" - Fingerbanger
"I have always felt that it is better to do what is beautiful than what is 'right'" - Eliot Fisk

Wedding music and guitar lessons in Essex. Listen at: http://www.rollmopmusic.co.uk

Post Reply