Skip to content
Jayy
Jayy
@jayy
Active Member
Joined: May 6, 2009
Topics: 0 / Replies: 7
Reply
Re: Nice Takamine ... with a nice crack !

It's a nice looking crack.This to me is quite a complex repair to do well if you don't have any experience. It's not essential that you use titebond y...

14 years ago
Reply
Re: Strat setup question - fretbuzz at 11th fret

If it's a prominent buzz fretting at the 11th fret then you would have to say the 12th fret is high. I would get a short straight edge on it to see ho...

14 years ago
Reply
Re: Is short scale prone to fret buzz?

A short scale = less string tension so it will be more likely to buzz at same action height as a longer scale. Your buzz sounds more like something is...

14 years ago
Reply
Re: Graphite bridge a good ground?

Sorry I'm thinking about carbon fibre similar to for strengthening guitar necks. It's not the guitar nut type graphite although I didn't know you cou...

14 years ago
Reply
Re: Graphite bridge a good ground?

I have some graphite here 8X3mm cross section and about a metre long. End to end it measures about 8 ohms so I would think it would be ok for this.

14 years ago
Reply
Re: Raised Bridge

Hi torresfan, if the repairman suggested shaving down the bridge that would usually mean a high action that can't be lowered enough by reducing the sa...

14 years ago
Reply
Re: Fret buzz on an Epi Les Paul

You're in the area of a low action and almost straight neck. The harder you hit it the more likely it is to rattle. As a guitar player you want low ac...

14 years ago