Hey all! I was just wondering what I should do with my strap pin (Not Strap lock).. It came loose after some rough use with it, and the wood is worn down now so I can't screw it in and still have it hold... Could I just put superglue in there or something? The strap pins are really big so I have no problem with the strap falling off... What would strap- locks do? Could I still put strap locks in now, even though the wood is worn down?? Thanks. :)
Stairway to Freebird!
An easy fix is-
Elmer's Wood Glue & a couple of tooth pics
Just cut the tooth pics to size (you don't need a lot of them, depends on the wear), put a little glue in the hole, then the cut tooth picks, a dab of more glue, screw in your pin and DON'T mess with it for atleast 24 hours.
An easy fix is-
Elmer's Wood Glue & a couple of tooth pics
Just cut the tooth pics to size (you don't need a lot of them, depends on the wear), put a little glue in the hole, then the cut tooth picks, a dab of more glue, screw in your pin and DON'T mess with in for atleast 24 hours.
Alright, thanks alot... :)
Stairway to Freebird!