hi i just bought a yamaha mg10/2 mixer and was just wondering how do i connect it to my guitar and than to my soundcard? which is guitar->mixer->soundcard anyone has any ideas? thanks alot
You can download the PDF instructions from this page. http://img3.musiciansfriend.com/dbase/pdf/man/m_630048.pdf
you will probably need a dual RCA jack that goes into a stereo mini jack that plugs into the input jack of your sound card (not the mic jack) You can plug the guitar into the mixer, it should have a 1/4 jack to plug it into. If your amp has a "LINE OUT" you can plug that into your mixer and your guitar into the amp WARNING_MAKE DARN TOOTIN THAT YOU DON"T PLUG THE "SPEAKER OUTS" INTO YOUR MIXER :!: good luck--the dog
thansk for the info but can i just plug teh guitar into the mixer than from the mixer into the soundcard and than output frm my speakers which is guitar->mixer->soundcard->speakers... and another thing where do plug my cable into the mixer for output into the soundcard?
!, yes
2, on top on the right side you will find a right and left str out jacks ( looks like the outlets you might find in the back of a stereo receiver) These are also called RCA jacks or phono jacks. look at the pdf instructions I sent you, it should open to the page you need to look at :D
this is what you need http://www.musiciansfriend.com/srs7/g=rec/search/detail/base_pid/333055/ you can get them at any radio shack.
you should put the rca jacks into the line out( or stereo out) and the mini stereo jack into the sound card ( line in, NOT the mic jack :twisted: ) If you put it in the mic jack it will distort easily and will not record in steeo.
thanks for the help smokindog but can i use the INSERT I/O socket on my mixer for the line in and than into my soundcard's line in and whats the difference? btw the stereor out on my mxier is a 1/4 socket so i won't be able to use the RCA cables...any other suggestion?