Does the pedal work OK on battery power now? Does the led stay steady or flash on battery? :?
Try lubricating the nut, string trees and bridge saddles to see if that solves your problem first. You can use light oil or grease or even wax on the...
Thanks for the further affirmations on the 2X10, I do prefer a tight, punchy bass as opposed to just a loud, boomy and unfocused sound. I'm leaning t...
Thanks everyone, for the feedback so far. I have to say that I'm leaning more and more towards the 2X10. Two 10's actually wind up being a bit cheap...
You could try putting a piece of hardwood dowel that's just small enough in diameter to slide inside the threaded portion of the bushing and is about ...
If you are not able to drill out the hole and plug it, you could try re-seating the the bushing in an epoxy product like JB WELD. This isn't the two-...
"They tapped on the wall. Which is amazing when you consider my house isn't attached to any other house. Tapping outside on a brick wall..........."In...
You might also try barring the low E and A with your index finger to help pull your hand down into position, it might not feel as "klenchy". :D
A number of humbucker manufacturers orient the south pole of the neck pickup toward the neck and the south pole of the bridge pickup towards the bridg...
The Wilkinson lightweight, adjustable, bridge/stopbar is the one I was thinking of. :D
It's possible to buy a wrap-around style bridge that is also adjustable for intonation (at least somewhat). Guitarfetish has an inexpensive one (I do...
I hate to sound skeptical here, but was there a real question as the point of this post, or is this just blatant spamming? The wording of the post so...
Thanks for the responses, Gnease and Dagwood, I finallly figured out that SX tried to tie into a bridge stud from the bridge pickup cavity instead of ...