Excellent! I know the Windsor (and the Vox) are voiced for the British sound and wasn't quite sure it would do "classic rock". I know I have more read...

Now I use those small Jazz III picks but I used normal size picks, specifically the Dunlop Tortex. I used to hold it in such a way I played with the "...

Welcome and keep PLAYING!I bought a guitar and jumped on board in April, then went through frustration at not being able to get chords to sound cleanl...

Wasn't swing big here a few years ago? :) Not familiar with the company, but all this talk got me curious so I started looking at the Agile line - th...

Thanks Cat; as long as the search feature is enabled, a thread can never truly die.... neither will my hope for a precision instrument! :lol: Really g...

Ok, at first I was reading line for line but resorted to skimming; still, I didn't see a concrete answer so maybe there isn't one to this. I tune with...

I finally bit the bullet and picked up the AC30; after reading more reviews it seemed like the one to try since the clean tones met with high approval...

+1 to both replies. The biggest problem will be cold solder joints, where either the solder and connection did not get hot enough or the connection wa...

Couple of things you can do to make barre chords easier. First, make sure your thumb is behind the neck, not draped over the top. Your thumb should po...

I've got the AC30 model and am going to get the Classic Rock one as well. They are great for what they are and with the portability you can play in t...

how best to mute ..... In listening to recorded music or my teacher it always sounds so clean :( Don't compare your playing to professional studio r...

I have the same problem/questions as BlankRune; how best to mute so as much extra sound is damped as possible but not have what you play sound clunky ...

sounds like a rough problem :) if I were elected president I would demand two guitars for every household. :idea: I'd vote for you mister :D +1, le...

I was under the impression the nut was glued in and you had to chisel, scrape and pray through the whole job. You may need to give the old nut a coup...