You may have to experiment to find the right gain setting from the wireless to the amp. I know mine puts out lots of gain so I have to make sure it ha...

Ever wonder what's going through folks mind when they come to a forum like this and post that junk. Isn't that Tramadol just a high powered aspirin th...

A few things to think about or try. As other have suggested. Take it in if your not comfortable repairing it yourself and your not familiar with Safet...

If you go to a music store and ask them for either 1/4" Mono unshielded unbalanced Patch Cables or 1/4" unshielded balanced patch cables. The TS cab...

Oh yes the Inspiration of getting prepared, transporting equipment, setting up, and end of the night adventure. Brings back many memorable experience...

I would set the Tuner to come on right away, and the fan either to the second set or the ones the amp is connected to. The amp shouldn't pickup noise ...

I've heard of a couple that have had reverb problems and also the phase inverter is prone to oscillation. Although not all that common. If you happen ...

I use a 1/4-inch to 1/4-inch Tip & Sleeve.... Unshielded cable. The type you would use to connect a racked processor to the efffects send and retu...

I don't know much about that particular one. I have spent alot time with a Small Stone phase shifter.Joe

I've always been a day late and a dollar short. Best of luck on your two adventures.Joe

Your Welcome.It's good to hear it was an easy fix.joe

Maybe check to see if any thing that plugs into any of the boards has come loose. Could even be a bad solder joint, when it gets warmed up the joint f...

You folks always surprise me. This is great. Joe

I like the song. Has that true to life feel.Joe

Yes the right attenuator or Dummyload will allow you to run your tube amp at its sweet spot (as its called), line level into anything that will except...