I learned something similar several years ago while running lossy codec (ACC, mp3 …) listening tests. as part of the program we had to train listene...
this is all very subjective …I've never been a big fan of the center pup all by itself -- especially if playing relatively clean setup. I like the m...
If I understand your description correctly, you have mirror imaged the wiring on the pots -- that is mixed up the outer contact connections on the pot...
You should find an experienced and certified local electrician to help you fix any problems you locate. the certified electrician part is very import...
I'm assuming you are picking the notes several times, and the issue is the modulated noise tails at a lower level. sounds to me as if a compressor in ...
put up a recording maybe?
sounds like you have a new source of interference with a duty cycle on its emissions. did you just get a new piece of electronic equipment in your pra...
make sure all those grounds are properly (re-)soldered. pay particular attention to the bridge/tailpiece ground. if not connected, the behavior you de...
no matter how you end a song live, everyone should have their eyes on the one person who is leading the arrangement for that song -- unless due to tha...
if the string is not slipping off the post as Kent suggests:remove the string from the post. when you tighten the screw - presuming it is the one goin...
he's alive on FB.
you stole it! enjoy.
I'd glue it. Tite Bond Original is the stuff.
I think the H4n has supplanted the H4. I have an H4, and can confirm it works very well as a ready-to-go stereo audio recorder. I've never bothered to...
I would experiment with the value of Q2's collector resistor (the 4.7k resistor to + supply)-- maybe try 3.3k, 3.9k, 5.6k, 6.8k and listen. 2.2k and 8...